Results 1 - 112 of 112
10 t load cell
Transducer device for mechanical load into electrical signals conversion that allows the strength measures up to 10 t, both in tension and compression.
https://www.upc.edu/sct/en/equip/687/10-t-load-cell.html
50 t load cell
Transducer device for mechanical load into electrical signals conversion that allows the strength measures up to 50 t, both in tension and compression.
https://www.upc.edu/sct/en/equip/688/50-t-load-cell.html
Abraser
A device for determining the susceptibility of fabrics to pilling and contact abrasion resistance.
https://www.upc.edu/sct/en/equip/320/abraser.html
Abrasion tester
Equipment for measuring the degree of abrasion of fabric or paper surfaces
https://www.upc.edu/sct/en/equip/707/abrasion-tester.html
Atomic force microscope (AFM)
Equipment that provides three-dimensional images of solid surfaces with a high resolution. It is based on local interaction between a point and the observed ...
https://www.upc.edu/sct/en/equip/226/atomic-force-microscope-afm.html
Autoclave-rotary digester
Rotary autoclave device can be used as leaching-digester, with automatic control of temperature and pressure, up to 15 kg/cm 2 and 180 °C respectively. ...
https://www.upc.edu/sct/en/equip/599/autoclave-rotary-digester.html
Ball mill
The equipment is a ball mill that pulverizes and mixes soft, semi-hard, hard and extremely hard, brittle and fibrous materials. This equipment is suitable ...
https://www.upc.edu/sct/en/equip/426/ball-mill.html
Bauer Mcnett fibers sorter
Equipment for fiber length classification of 3 stages, by length fraction sieve and size distribution characterization, according to UNE 57118.
https://www.upc.edu/sct/en/equip/569/bauer-mcnett-fibers-sorter.html
Bekk digital smoothness meter
Equipment for determining paper and paperboard smoothness, by using Bekk method, according to ISO 5672.Air permeability measuring head included.
https://www.upc.edu/sct/en/equip/600/bekk-digital-smoothness-meter.html
Bending strength
Equipment for paper samples bending strength determination and measures (folding endurance), according to ISO 5626.
https://www.upc.edu/sct/en/equip/613/bending-strength.html
Bendtsen permeability tester for paper
Equipment for determining and measuring paper and paperboard air permeability, according to ISO 5636-3, by using Bemdsten method. Smoothness/roughness ...
https://www.upc.edu/sct/en/equip/608/bendtsen-permeability-tester-paper.html
Biaxial test frame
Equipment for conducting mechanical tests on compression-bending elements by using two XY force components (axial and transverse). The maximum axial load ...
https://www.upc.edu/sct/en/equip/257/biaxial-test-frame.html
Brecht Holl fiber classifier
Equipment that allows, through a sieve, the classification of cellulose fiber length fractions and their characterization by size.
https://www.upc.edu/sct/en/equip/570/brecht-holl-fiber-classifier.html
Burning Tester
Equipment for determining the bursting strength of a fabric by applying multiaxial pressure increased through a membrane, under UNE-EN ISO 13938.
https://www.upc.edu/sct/en/equip/706/burning-tester.html
Bursting measurement
Equipment for paper and paperboard bursting strength determination, according to ISO 2758.
https://www.upc.edu/sct/en/equip/593/bursting-measurement.html
Canadian Standard Freeness - CSF
Canadian Standard Freeness Testers determine the rate of drainage of a dilute pulp suspension, also refining assessment according to ISO 5267-2, and express ...
https://www.upc.edu/sct/en/equip/577/canadian-standard-freeness-csf.html
CCT-TTT diagrams elaboration
Service for transformation curves performance of transformation curves in metallic materials subjected to thermal treatments, both continuous cooling (Continuous ...
https://www.upc.edu/sct/en/servei/101/cct-ttt-diagrams-elaboration.html
Climatic chamber
A device used for measuring and evaluating the aging of polymer material samples or fabrics under controlled temperature, humidity and light conditions.
https://www.upc.edu/sct/en/equip/327/climatic-chamber.html
Climatic chamber
A device that recreates controlled temperature and humidity conditions. It can be programmed to perform cycles. The device has a temperature range of -45 ...
https://www.upc.edu/sct/en/equip/80/climatic-chamber.html
Climatic tests
Service that performs a variety of climatic tests (temperature and humidity control) are performed to evaluate the aging and durability of materials, their ...
https://www.upc.edu/sct/en/servei/19/climatic-tests.html
Compression testing machine
Equipment used for the realization of conventional compression testing and also for calculate the modulus of rigidity on cylindrical test tubes and construction ...
https://www.upc.edu/sct/en/equip/411/compression-testing-machine.html
Contact angle measure
Optical system device, with automatic dosing unit and software for contact angle measure (both static and dynamic) between liquids and solids. Also suitable ...
https://www.upc.edu/sct/en/equip/778/contact-angle-measure.html
Contact angle measuring system
A device for determining dynamic and static contact angles using sessile and captive drop techniques.
It calculates the surface tension, interfacial ...
https://www.upc.edu/sct/en/equip/367/contact-angle-measuring-system.html
Curvature testing machine (4 points)
The equipment allows make a curvature test for measuring the rigidly and for value the fatigue resistance of bituminous materials for pavement.
The ...
https://www.upc.edu/sct/en/equip/413/curvature-testing-machine-4-points.html
Cutting rheometer
Equipment to measure the cutting effort of bituminous products. The main features of this equipment are:
- Angular resolution of 0.012 radians. ...
https://www.upc.edu/sct/en/equip/414/cutting-rheometer.html
Data acquisition system (analog-digital)
A system for collecting, monitoring and storing data from different instruments. It has Advantech acquisition cards, each with sixteen 16-bit channels ...
https://www.upc.edu/sct/en/equip/254/data-acquisition-system-analog-digital.html
Digital micrometer
Equipment for paper and paperboardthickness determination, according to ISO 534, ISO 12625-3 (tissue) and EN 57103 (corrugated) for thickness ranges between ...
https://www.upc.edu/sct/en/equip/601/digital-micrometer.html
Disintegrator wet fiber
Equipment for wet fiber disintegration and individualization at low consistency, according to ISO 5263.
https://www.upc.edu/sct/en/equip/590/disintegrator-wet-fiber.html
Displacement transducers LVDT
Inductive transducer LVDT equipment, for accurate measurement of displacement in applications of control and regulation measures.
https://www.upc.edu/sct/en/equip/690/displacement-transducers-lvdt.html
Dry grinder pulp
Equipment for paper pulp dry shredding, by means of a rotating blades and toothed ring system.
https://www.upc.edu/sct/en/equip/588/dry-grinder-pulp.html
Dynamic mechanical testing machine
A dynamic testing machine with an axial hydraulic servo system that has a frame with four columns and a compression and traction actuator at ±1000 kN. ...
https://www.upc.edu/sct/en/equip/375/dynamic-mechanical-testing-machine.html
Dynamic mechanical testing machine
A dynamic testing machine with an axial hydraulic servo system. It has a frame with two columns and an actuator for compression and traction at ±500 kN. ...
https://www.upc.edu/sct/en/equip/371/dynamic-mechanical-testing-machine.html
Dynamic mechanical thermal analyzer (DMTA)
A device for the thermomechanical testing of materials, including determination of stress, deformation and/or elastic modulus measurements according to ...
https://www.upc.edu/sct/en/equip/54/dynamic-mechanical-thermal-analyzer-dmta.html
Dynamo-mechanical analyzer
A device for measuring mechanical properties of small volumes of material by applying an oscillating or static strength in controlled frequency and temperature ...
https://www.upc.edu/sct/en/equip/153/dynamo-mechanical-analyzer.html
Electric cutter rotation
The equipment consists of an electric cutter rotation. This provides a compact and ergonomic design with thickness totalizer and cut counter, for each ...
https://www.upc.edu/sct/en/equip/425/electric-cutter-rotation.html
Electric extensometric amplifier/extensometric amplifier
A device for coupling load cells or extensometric gauges for application in mechanical testing of materials. It enables the combination of magnitudes such ...
https://www.upc.edu/sct/en/equip/253/electric-extensometric-amplifierextensometric-amplifier.html
Electric extensometric amplifiers/extensometric amplifier
A device for coupling load cells or extensometric gauges for application in mechanical testing of materials. It is composed of modules and enables the ...
https://www.upc.edu/sct/en/equip/252/electric-extensometric-amplifiersextensometric-amplifier.html
Electric oven drying and sterilization
Oven, with or without air circulation, which allows working in a range of temperatures between 0 0 C and 250 0 C. The unit has a volume of 80 liters
https://www.upc.edu/sct/en/equip/419/electric-oven-drying-sterilization.html
Elevator furnace
A furnace that is 180 mm in diameter and 180 mm in length that reaches temperatures up to 1400 °C. It has a sliding plate for testing thermal fatigue ...
https://www.upc.edu/sct/en/equip/168/elevator-furnace.html
Elmendorf tear tester
Automatic equipment for the determination of the tear resistance by the Elmendorf method of paper, board, foil, etc. All tests carry out under the standards ...
https://www.upc.edu/sct/en/equip/802/elmendorf-tear-tester.html
Environmental chamber
Environmental conditions reproduction device, temperature and humidity controlled, programmable and suitable for cycles within temperature range between ...
https://www.upc.edu/sct/en/equip/576/environmental-chamber.html
Falling rod viscometer
Equipment for determining greasy ink rheological characteristics, such as plastic viscosity (poise or Pa·s) and threshold stress (dynas/cm 2 or Pa)
https://www.upc.edu/sct/en/equip/581/falling-rod-viscometer.html
Fast
Objective measurements of fabrics by performing a series of tests that predict performance properties and appearance of fabrics during the manufacture ...
https://www.upc.edu/sct/en/equip/710/fast.html
Fragmentation resistance equipment
Equipment for determining, by means of impact, cohesion loss in open grain size specimens, with temperature control. Equipped with 12 mm wall thickness ...
https://www.upc.edu/sct/en/equip/416/fragmentation-resistance-equipment.html
Furnace for feldspathic coatings
A 220 mm x 320 mm x 420 mm baking furnace for feldspathic coating treatments used in dental zirconia and other ceramic heat treatments up to 1200 °C. ...
https://www.upc.edu/sct/en/equip/167/furnace-feldspathic-coatings.html
Gold, carbon and gold-palladium sputter coater
Equipment that enables the deposition of thin uniform conductive layers through target ionization for observation and study using electron microscopy.
https://www.upc.edu/sct/en/equip/250/gold-carbon-gold-palladium-sputter-coater.html
Grinding mill
Cellulosic samples grinding mill for further studies and analysis.
https://www.upc.edu/sct/en/equip/604/grinding-mill.html
Grinding mill
Liquid or dry samples grinding equipment, by means of balls rotational. Laboratory conditions usually, but possible in cryogenic conditions, by adding ...
https://www.upc.edu/sct/en/equip/522/grinding-mill.html
Gurley permeability tester for paper
Equipment for determining and measuring paper and paperboard samples permeability, according to ISO 5636-5.
https://www.upc.edu/sct/en/equip/609/gurley-permeability-tester-paper.html
Hardness tester
Equipment for materials Vickers, Brinell or Rockwell hardness determination, according to standards, with applied load between 1 and 3000 kg.
https://www.upc.edu/sct/en/equip/516/hardness-tester.html
High-Velocity Oxy-Fuel Thermal Spray equipment for coating manufacturing
HVOF is a thermal spray system utilising the combustion of gases, such as Hydrogen or a liquid fuel such as kerosene. Fuel and oxygen mix and atomise within ...
https://www.upc.edu/sct/en/equip/804/high-velocity-oxy-fuel-thermal-spray-equipment-coating-manufacturing.html
Hydraulic press
Equipment consisting of a monitored hydraulic press of 80 tons, equipped with safety cage, which allows crimping, straightening or warp metal pieces.
https://www.upc.edu/sct/en/equip/573/hydraulic-press.html
Hydraulic press
Equipment for performing compaction processes through the isostatic application of powders of various materials (metals, hard metals, ceramics, etc.).
https://www.upc.edu/sct/en/equip/173/hydraulic-press.html
Hydraulic universal testing machine
The equipment allows make dynamic and static tests (tensile, compression) for bituminous mixtures. It has a maximum weight of 100 kN, and it allow a displacement ...
https://www.upc.edu/sct/en/equip/412/hydraulic-universal-testing-machine.html
Hydraulic universal testing machine
Hydraulic equipment for conventional static and fatigue testing. It is equipped with an environmental chamber that can work in a temperature range between ...
https://www.upc.edu/sct/en/equip/32/hydraulic-universal-testing-machine.html
Impact compactor
The equipment is an automatic electromagnetic compactor, with a wooden stand and an electronic selector of the shock number, with automatic detention. ...
https://www.upc.edu/sct/en/equip/408/impact-compactor.html
Impedance spectrometer
Device consisting of a high current potentiostat or galvanostat for carrying out accelerated corrosion tests by using electrochemical impedance spectroscopy. ...
https://www.upc.edu/sct/en/equip/185/impedance-spectrometer.html
Laboratory refiner
Equipment for cellulosic raw material shredding and refining, different configurations to obtain dissimilar features samples.
https://www.upc.edu/sct/en/equip/625/laboratory-refiner.html
Load frame with base frame
Equipment for conducting mechanical tests (up to 200 kN) for components with hydraulic cylinders. The maximum testing length is 1400 mm.
https://www.upc.edu/sct/en/equip/258/load-frame-with-base-frame.html
LWH displacement transducer
Potentiometric transducer LWH equipment, for accurate measurement of displacement in applications of control and regulation measures.
https://www.upc.edu/sct/en/equip/689/lwh-displacement-transducer.html
Lyophilizer
A device for freeze-drying a previously frozen product by the vacuum sublimation of ice.
https://www.upc.edu/sct/en/equip/362/lyophilizer.html
Mechanical properties characterization in metallic materials
Flow curve characterization for metallic materials, both in conventional compression tests and uniaxial tensile, hot or cold, to determine ductility parameters, ...
https://www.upc.edu/sct/en/servei/103/mechanical-properties-characterization-metallic-materials.html
Microhardness tester
Equipment for determining the hardness of solid materials. The Vickers hardness is determined between 98 mN (10 g - 0.01 HV) and 19.6 N (2 kg – 2 HV).
https://www.upc.edu/sct/en/equip/156/microhardness-tester.html
Microhardness tester
Equipment for materials Vickers hardness determination, with applied loads between 98 mN and 19,6 N.
https://www.upc.edu/sct/en/equip/515/microhardness-tester.html
Microindentation hardness testers
Normal
0
21
false
false
false
MicrosoftInternetExplorer4
...
https://www.upc.edu/sct/en/equip/396/microindentation-hardness-testers.html
Microtensile
Equipment with a load cell of 5 kN, which allows uniaxial tensile tests on specimens cold for small size and flat geometry.
https://www.upc.edu/sct/en/equip/572/microtensile.html
Obtaining metals nanocrystalline structure
Obtaining metals with ultrafine and nanometer grain by mechanical milling or by severe plastic deformation processes, namely channel angular extrusion ...
https://www.upc.edu/sct/en/servei/102/obtaining-metals-nanocrystalline-structure.html
PFI mill
Equipment for paper pulp refining, according to ISO 5264-2, as a preliminary step to characterize samples physical properties
https://www.upc.edu/sct/en/equip/605/pfi-mill.html
Pin-on-disk tribometer
Equipment for wear testing through contact and friction between two materials, one of them disc-shaped and one rod-shaped or ball. Run dry, in lubricating ...
https://www.upc.edu/sct/en/equip/510/pin-on-disk-tribometer.html
Pressure Aging Vessel,PAV
Equipment that allows accelerated aging processes bituminous products by pressure and temperature.
https://www.upc.edu/sct/en/equip/422/pressure-aging-vesselpav.html
Print testbed
Equipment for ink/paper relationship testing in dynamic conditions with parameters variation as pressure, speed and ink depth. Characteristic tests for ...
https://www.upc.edu/sct/en/equip/597/print-testbed.html
PTT building diagrams (Precipitation-Temperature-Time)
Service for precipitation-temperature-time (PTT) construction of curves by performing stress relaxation tests on subjected heat treatment materials.
https://www.upc.edu/sct/en/servei/100/ptt-building-diagrams-precipitation-temperature-time.html
Reflectance spectrophotometer
Equipment for evaluation of optical properties of samples of paper and other surfaces, for wavelengths between 400 nm to 700 nm. Enables the identification ...
https://www.upc.edu/sct/en/equip/724/reflectance-spectrophotometer.html
Refrigerating chamber
Equipment for keeping materials at low temperatures (between 0 °C and 30 °C) and regulating the temperature according to the volume introduced and the ...
https://www.upc.edu/sct/en/equip/177/refrigerating-chamber.html
Resonance fatigue testing machine
Equipment used for testing resonance fatigue, with temperatures up to 1000 °C. The maximum load is 10 kN and the maximum operating frequency is 250 Hz.
https://www.upc.edu/sct/en/equip/35/resonance-fatigue-testing-machine.html
Resonance stiffness measurement
Equipment for bending stiffness measurement and determination in paper samples, by using resonance method, according to ISO 5629.
https://www.upc.edu/sct/en/equip/618/resonance-stiffness-measurement.html
Roadmap generator, Rapid-Köthen method
Equipment for roadmap generation, according to Rapid-Köthen method, to reproduce industrial conditions and parameters on a laboratory scale, and to perform ...
https://www.upc.edu/sct/en/equip/596/roadmap-generator-rapid-kothen-method.html
Roller compactor
The equipment allows the compaction of solid samples. The main applications of this equipment are:
- Preparation of bituminous homogeneous plates. ...
https://www.upc.edu/sct/en/equip/410/roller-compactor.html
Rotational viscometer
Equipment for fluids viscosity measurement and analysis(particularly sauces coated paper), as well as high viscosity and thixotropic time-dependent rheological ...
https://www.upc.edu/sct/en/equip/725/rotational-viscometer.html
Salt spray chamber
Equipment for carrying out standardized accelerated corrosion tests (ASTM) in a saline environment to determine physicochemical properties (corrosion resistance) ...
https://www.upc.edu/sct/en/equip/181/salt-spray-chamber.html
Sandblaster
Equipment used for modifying the surface roughness of components used for dental applications. It is also suitable for surface cleaning dental material ...
https://www.upc.edu/sct/en/equip/171/sandblaster.html
Schopper-Riegler drainage
Equipment for pulp sample drainability measurement and determination, as well as refining behavioral assessments, according to ISO 5627-1.
https://www.upc.edu/sct/en/equip/621/schopper-riegler-drainage.html
Scott Bond strength
Equipment for paper and paperboard samples resistance measurement and determination, in Z direction.
https://www.upc.edu/sct/en/equip/622/scott-bond-strength.html
Static stiffness measurement (Taber)
Equipment for bending stiffness measurement and determination by Taber method, according to ISO 5682.
https://www.upc.edu/sct/en/equip/619/static-stiffness-measurement-taber.html
Suntest
Equipment for suntest and accelerated aging test, radiation intensities between 765 and 400 W/m 2 (UV max. for λ <800 nm), controlled at constant ...
https://www.upc.edu/sct/en/equip/633/suntest.html
Swivel compactor
The equipment allows the centrifuged compaction of solid samples. The main applications of this equipment are:
- Compaction of bituminous paving ...
https://www.upc.edu/sct/en/equip/409/swivel-compactor.html
Tensile tester
Tensile testing machine for determining the tensile tests on textile materials. Data acquisition is digitized. Two load cells 10N and 5 KN, serrated jaws ...
https://www.upc.edu/sct/en/equip/713/tensile-tester.html
Thermogravimetric analyzer
A device for carrying out thermogravimetric testing and quantitative measures of mass changes during thermal degradation and transition processes (stability ...
https://www.upc.edu/sct/en/equip/53/thermogravimetric-analyzer.html
Thermomechanical analyzer
A testing device for measuring expansion coefficients and dimensional variations of a body caused by temperature changes, without changing its state. The ...
https://www.upc.edu/sct/en/equip/55/thermomechanical-analyzer.html
Traction, compression and fatigue testing machine
A machine designed to work with biomaterials (calcium phosphates, metals, polymers, etc.). The machine is composed of two cells with an axial load of 25 ...
https://www.upc.edu/sct/en/equip/354/traction-compression-fatigue-testing-machine.html
Tribometer
Equipment for testing wear with several configurations (pin-on-disc, ball-on-disc, disc-on-disc) in a temperature range up to 150 °C and with applied ...
https://www.upc.edu/sct/en/equip/172/tribometer.html
Tubular furnace
A tubular furnace with an air heating system up to 1600 °C that is especially suitable for sintering new ceramic materials and can work under conditions ...
https://www.upc.edu/sct/en/equip/169/tubular-furnace.html
Ultramicrohardness tester
Equipment for materials and thin films Vickers hardness determination, with applied loads between 1 and 1000 mN. Incorporates a 400 magnification optical ...
https://www.upc.edu/sct/en/equip/514/ultramicrohardness-tester.html
Uniaxial load frame
Equipment for conducting mechanical tests under the action of uniaxial loads (up to 400 kN). The maximum sample dimensions are 3 m x 3 m x 12 m (width ...
https://www.upc.edu/sct/en/equip/260/uniaxial-load-frame.html
Uniaxial load frame
Equipment for testing the compression of struts and lightweight structures. Adjustable to different lengths. The maximum capacity is 200 kN, the maximum ...
https://www.upc.edu/sct/en/equip/259/uniaxial-load-frame.html
Uniaxial machine for tensile and compressive
Double column machine (desktop) for compression and tensile tests, with a maximum force capacity of 5 kN, to test the resistance of biomaterials, plastics, ...
https://www.upc.edu/sct/en/equip/423/uniaxial-machine-tensile-compressive.html
Universal electromechanical testing machine
Electromechanical equipment for conventional static and fatigue tests from ambient temperature to 1000 °C. The maximum load capacity is 10 kN and the ...
https://www.upc.edu/sct/en/equip/34/universal-electromechanical-testing-machine.html
Universal electromechanical testing machine
Electromechanical equipment for conducting conventional static compression, traction, tensile and fatigue tests with an ambient temperature of up to 1400 ...
https://www.upc.edu/sct/en/equip/30/universal-electromechanical-testing-machine.html
Universal electromechanical testing machine
Electromechanical equipment for conducting conventional static, compression and traction tests at ambient temperature with a maximum load capacity of 100 ...
https://www.upc.edu/sct/en/equip/33/universal-electromechanical-testing-machine.html
Universal hydraulic machine for mechanical testing
Hydraulic equipment for conducting conventional compression, traction and fatigue tests, with displacement and force control. Loading ramps and cyclic ...
https://www.upc.edu/sct/en/equip/255/universal-hydraulic-machine-mechanical-testing.html
Universal hydraulic machine for mechanical testing
High-precision hydraulic equipment for conventional static and fatigue tests. It has a maximum load of 10 kN and a maximum fatigue operating frequency ...
https://www.upc.edu/sct/en/equip/31/universal-hydraulic-machine-mechanical-testing.html
Universal mechanical testing machine
Electromechanical equipment for conducting traction, compression and tensile tests. Maximum load: 100 kN.
https://www.upc.edu/sct/en/equip/256/universal-mechanical-testing-machine.html
Universal mechanical testing machine
Electromechanical equipment for conventional static compression, tensile and bending tests, up to 1100 °C, 10000 kg (10 t) maximum load. Test management ...
https://www.upc.edu/sct/en/equip/519/universal-mechanical-testing-machine.html
Universal mechanical testing machine
Electromechanical equipment for conventional static compression, tensile and bending tests, from -50 to 250 °C, 10000 kg (10 t) maximum load. Test management ...
https://www.upc.edu/sct/en/equip/518/universal-mechanical-testing-machine.html
Universal tensile test machine
Tensile and compression test equipment, both cold and hot, by means of an 1100 °C radiation furnace coupling (Chamber, Model E4 infrared heating system). ...
https://www.upc.edu/sct/en/equip/565/universal-tensile-test-machine.html
Universal testing machine
Electromechanical equipment for tension, compression and wear resistance testing, software control and data acquisition included. 10 N and 500 N cell load ...
https://www.upc.edu/sct/en/equip/591/universal-testing-machine.html
Universal transmitter
Transmitter device that allows pressure measurement and visualization on a digital display.
https://www.upc.edu/sct/en/equip/686/universal-transmitter.html
Valley pile
Equipment for pulp refining, according to ISO 5264-1, as a preliminary step to physical properties characterization.
https://www.upc.edu/sct/en/equip/612/valley-pile.html
Water bath
Water bath, 10 liters volume, 350 mm x 210 mm x 140 mm size (length x width x height), temperature range between 0 and 100 ° C.
https://www.upc.edu/sct/en/equip/417/water-bath.html
Water retention test, WRV
Equipment for pulps water value determining (WRV) in pulps, according to standard 23714.
https://www.upc.edu/sct/en/equip/592/water-retention-test-wrv.html
Wheel-tracking test machine
Equipment to measure the plastic deformation of bituminous mixtures according to the UNW EN 12697-22 and the NLT-173.
It is possible, with this equipment, ...
https://www.upc.edu/sct/en/equip/415/wheel-tracking-test-machine.html
Zero-span tensile test
Electromechanical zero-span tensile test equipment, for dry or wet paper samples, according to ISO 15361.
https://www.upc.edu/sct/en/equip/673/zero-span-tensile-test.html