Sections

you are here you are here: home següent Browse by subject area


Metrology

Results 1 - 23 of 23

3D - CMM
Measurements Coordinate Components (MCC) equipment by means of continuous probe, for complex components verification, with the aim of meeting quality standards ...
https://www.upc.edu/sct/en/equip/791/3d-cmm.html

Atomic absorption spectrophotometer
Equipment for analyzing metals in inorganic solutions. The sample or pattern flows into the automatic diluter (SIPS). The calibration time with 5-6 patterns ...
https://www.upc.edu/sct/en/equip/47/atomic-absorption-spectrophotometer.html

Boxes of grade 0 gauge blocks
A device consisting of several longitudinal grade 0 gauge blocks (GB) of between 0.5 mm and 100 mm. It has a 115-GB and a 46-GB box, both standardized ...
https://www.upc.edu/sct/en/equip/60/boxes-grade-0-gauge-blocks.html

Calipers calibration
Caliper calibration with a maximum range of 1000 mm and a resolution of ≥ 0.01 mm. The laboratory is accredited by the ENAC according to ISO 17025 with ...
https://www.upc.edu/sct/en/servei/2/calipers-calibration.html

Comparator calibration machine /Dial calibration
Equipment used for calibrating dial indicators in a range of 25 mm between the minimum and maximum measurement and an accuracy of 0.1 μm. According to ...
https://www.upc.edu/sct/en/equip/59/comparator-calibration-machine-dial-calibration.html

Dials calibration
Dial and digital indicators calibration, into a range up to 25 mm. Calibration resolution is 0.1 μm. Laboratory is accredited by ENAC according to ISO ...
https://www.upc.edu/sct/en/servei/4/dials-calibration.html

Electrical calibration
Calibration of electrical equipment such as clamp meters, multimeters, testers, oscilloscopes and temperature readers.
https://www.upc.edu/sct/en/servei/18/electrical-calibration.html

Gauge block calibrator
A device for making comparative measurements of grade 1 and 2 steel, ceramic and tungsten gauge blocks, with an accuracy of 0.01 μm and a measurement ...
https://www.upc.edu/sct/en/equip/57/gauge-block-calibrator.html

ID patterns Calibration - rings
Internal diameter patterns calibration. Measurement range from 2 mm to 230 mm. Resolution of 0.1 μm. Laboratory is accredited by ENAC according to ISO ...
https://www.upc.edu/sct/en/servei/6/id-patterns-calibration-rings.html

Instrumentation calibration
Optical instrumentation calibration in UV-VIS-NIR range (spectrophotometers, spectroradiometers, colorimeters, lux meters, radiometers, etc.).
https://www.upc.edu/sct/en/servei/35/instrumentation-calibration.html

Machine with a horizontal coordinate
Equipment for measuring any type of component, with an accuracy of 0.1 μm in one dimension and a limit of 200 mm for external measurements and 85 mm for ...
https://www.upc.edu/sct/en/equip/58/machine-with-horizontal-coordinate.html

Mammograph
Equipment for the calibration of devices that measure ionizing radiations.
https://www.upc.edu/sct/en/equip/265/mammograph.html

Metrology laboratory
Metrology laboratory service, with equipments for 2D and 3D implementation measures, also roughness, profiles determination as well as sphericity and curvature ...
https://www.upc.edu/sct/en/servei/118/metrology-laboratory.html

Micrometers calibration
Micrometers and palmers calibration, with a measuring range up to 800 mm. Llaboratory is accredited by ENAC according to ISO 17025, 152/LC10.110 accreditation ...
https://www.upc.edu/sct/en/servei/3/micrometers-calibration.html

Multiproduct electric calibrator
Multiproduct electrical generator, suitable for calibrating any electrical equipment. It generates any type of electrical signal (voltage up to 1000 V ...
https://www.upc.edu/sct/en/equip/62/multiproduct-electric-calibrator.html

OD patterns Calibration - axles
Out diameter patterns calibration. Measurement range from 0 to 300 mm. Resolution of 0.1 μm. Laboratory is accredited by ENAC according to ISO 17025, ...
https://www.upc.edu/sct/en/servei/5/od-patterns-calibration-axles.html

Photon irradiator
Equipment with 8 radioactive activity sources for performing calibrations of other devices by measuring ionizing radiation. It is accredited by the National ...
https://www.upc.edu/sct/en/equip/264/photon-irradiator.html

Portable electric calibrator
A portable electric multiproduct calibrator. It is a generator and reader of electrical signals (V, A), resistance and temperature. It can also be used ...
https://www.upc.edu/sct/en/equip/68/portable-electric-calibrator.html

Roughness-profilometer
Equipment for 2D and 3D roughness determining and measuring, for solid samples profiling, controlled by computer.
https://www.upc.edu/sct/en/equip/735/roughness-profilometer.html

Torque Plate
Dynamometer plate device, with signal amplifier and complete measurement sequence, for 3 load and moment components determination and measurement. It can ...
https://www.upc.edu/sct/en/equip/736/torque-plate.html

Vision Measuring Systems
Measurements Coordinate Components (MMC) equipment, as well as main geometrical characteristics. High speed data acquisition and high accuracy, for ...
https://www.upc.edu/sct/en/equip/790/vision-measuring-systems.html

Wind tunnel
Equipment consisting of an open circuit tunnel with a closed chamber of 20 cm in diameter for measuring velocity, pressure and visualization of flow, and ...
https://www.upc.edu/sct/en/equip/162/wind-tunnel.html

X-ray generator
High-stability X-ray generator of 30 kV, 40 kV and 300 kV, with a maximum voltage of 320 kV and 4.2 W power. It has been accredited by ENAC (ISO 17025) ...
https://www.upc.edu/sct/en/equip/263/x-ray-generator.html

Pujar
Scientific and Technical Services at the UPC
© UPC Open link in new window. Universitat Politècnica de Catalunya · BarcelonaTech.