Results 1 - 23 of 23
3D - CMM
Measurements Coordinate Components (MCC) equipment by means of continuous probe, for complex components verification, with the aim of meeting quality standards ...
Atomic absorption spectrophotometer
Equipment for analyzing metals in inorganic solutions. The sample or pattern flows into the automatic diluter (SIPS). The calibration time with 5-6 patterns ...
Boxes of grade 0 gauge blocks
A device consisting of several longitudinal grade 0 gauge blocks (GB) of between 0.5 mm and 100 mm. It has a 115-GB and a 46-GB box, both standardized ...
Caliper calibration with a maximum range of 1000 mm and a resolution of ≥ 0.01 mm. The laboratory is accredited by the ENAC according to ISO 17025 with ...
Comparator calibration machine /Dial calibration
Equipment used for calibrating dial indicators in a range of 25 mm between the minimum and maximum measurement and an accuracy of 0.1 μm. According to ...
Dial and digital indicators calibration, into a range up to 25 mm. Calibration resolution is 0.1 μm. Laboratory is accredited by ENAC according to ISO ...
Calibration of electrical equipment such as clamp meters, multimeters, testers, oscilloscopes and temperature readers.
Gauge block calibrator
A device for making comparative measurements of grade 1 and 2 steel, ceramic and tungsten gauge blocks, with an accuracy of 0.01 μm and a measurement ...
ID patterns Calibration - rings
Internal diameter patterns calibration. Measurement range from 2 mm to 230 mm. Resolution of 0.1 μm. Laboratory is accredited by ENAC according to ISO ...
Optical instrumentation calibration in UV-VIS-NIR range (spectrophotometers, spectroradiometers, colorimeters, lux meters, radiometers, etc.).
Machine with a horizontal coordinate
Equipment for measuring any type of component, with an accuracy of 0.1 μm in one dimension and a limit of 200 mm for external measurements and 85 mm for ...
Equipment for the calibration of devices that measure ionizing radiations.
Metrology laboratory service, with equipments for 2D and 3D implementation measures, also roughness, profiles determination as well as sphericity and curvature ...
Micrometers and palmers calibration, with a measuring range up to 800 mm. Llaboratory is accredited by ENAC according to ISO 17025, 152/LC10.110 accreditation ...
Multiproduct electric calibrator
Multiproduct electrical generator, suitable for calibrating any electrical equipment. It generates any type of electrical signal (voltage up to 1000 V ...
OD patterns Calibration - axles
Out diameter patterns calibration. Measurement range from 0 to 300 mm. Resolution of 0.1 μm. Laboratory is accredited by ENAC according to ISO 17025, ...
Equipment with 8 radioactive activity sources for performing calibrations of other devices by measuring ionizing radiation. It is accredited by the National ...
Portable electric calibrator
A portable electric multiproduct calibrator. It is a generator and reader of electrical signals (V, A), resistance and temperature. It can also be used ...
Equipment for 2D and 3D roughness determining and measuring, for solid samples profiling, controlled by computer.
Dynamometer plate device, with signal amplifier and complete measurement sequence, for 3 load and moment components determination and measurement. It can ...
Vision Measuring Systems
Measurements Coordinate Components (MMC) equipment, as well as main geometrical characteristics.
High speed data acquisition and high accuracy, for ...
Equipment consisting of an open circuit tunnel with a closed chamber of 20 cm in diameter for measuring velocity, pressure and visualization of flow, and ...
High-stability X-ray generator of 30 kV, 40 kV and 300 kV, with a maximum voltage of 320 kV and 4.2 W power. It has been accredited by ENAC (ISO 17025) ...