Sections

you are here you are here: home següent Browse by subject area


Analysis and characterization

Results 1 - 136 of 136

Abraser
A device for determining the susceptibility of fabrics to pilling and contact abrasion resistance.
https://www.upc.edu/sct/en/equip/320/abraser.html

Abrasion tester
Equipment for measuring the degree of abrasion of fabric or paper surfaces
https://www.upc.edu/sct/en/equip/707/abrasion-tester.html

Air permeability meter
Equipment for determining the air permeability of fabrics used for industrial and technical clothing.
https://www.upc.edu/sct/en/equip/319/air-permeability-meter.html

Atmospheric plasma
Equipment for changing the composition of gases by injection equipment for surface treatment and functional polymer surfaces and fiber (up to 6 nm thick).
https://www.upc.edu/sct/en/equip/652/atmospheric-plasma.html

Autoclave-rotary digester
Rotary autoclave device can be used as leaching-digester, with automatic control of temperature and pressure, up to 15 kg/cm 2 and 180 °C respectively. ...
https://www.upc.edu/sct/en/equip/599/autoclave-rotary-digester.html

Automatic accelerated corrosion chamber
A device for automatic accelerated corrosion tests, with cycles of immersion, extraction and drying, that simulate the draft conditions on a boat.
https://www.upc.edu/sct/en/equip/188/automatic-accelerated-corrosion-chamber.html

Automatic viscometer
Specific automatic viscometer for determining viscosity limit value of pulp samples chemically bleached with cuprietilendiamina (CED), according to ISO ...
https://www.upc.edu/sct/en/equip/637/automatic-viscometer.html

Bauer Mcnett fibers sorter
Equipment for fiber length classification of 3 stages, by length fraction sieve and size distribution characterization, according to UNE 57118.
https://www.upc.edu/sct/en/equip/569/bauer-mcnett-fibers-sorter.html

Bekk digital smoothness meter
Equipment for determining paper and paperboard smoothness, by using Bekk method, according to ISO 5672.Air permeability measuring head included.
https://www.upc.edu/sct/en/equip/600/bekk-digital-smoothness-meter.html

Bending strength
Equipment for paper samples bending strength determination and measures (folding endurance), according to ISO 5626.
https://www.upc.edu/sct/en/equip/613/bending-strength.html

Bendtsen permeability tester for paper
Equipment for determining and measuring paper and paperboard air permeability, according to ISO 5636-3, by using Bemdsten method. Smoothness/roughness ...
https://www.upc.edu/sct/en/equip/608/bendtsen-permeability-tester-paper.html

Brecht Holl fiber classifier
Equipment that allows, through a sieve, the classification of cellulose fiber length fractions and their characterization by size.
https://www.upc.edu/sct/en/equip/570/brecht-holl-fiber-classifier.html

Burning Tester
Equipment for determining the bursting strength of a fabric by applying multiaxial pressure increased through a membrane, under UNE-EN ISO 13938.
https://www.upc.edu/sct/en/equip/706/burning-tester.html

Bursting measurement
Equipment for paper and paperboard bursting strength determination, according to ISO 2758.
https://www.upc.edu/sct/en/equip/593/bursting-measurement.html

Canadian Standard Freeness - CSF
Canadian Standard Freeness Testers determine the rate of drainage of a dilute pulp suspension, also refining assessment according to ISO 5267-2, and express ...
https://www.upc.edu/sct/en/equip/577/canadian-standard-freeness-csf.html

CCT-TTT diagrams elaboration
Service for transformation curves performance of transformation curves in metallic materials subjected to thermal treatments, both continuous cooling (Continuous ...
https://www.upc.edu/sct/en/servei/101/cct-ttt-diagrams-elaboration.html

Centrifuge washer
Equipment for determining tissue shrinkage due to washing and the degradation of the colors of dyed fabric samples. It also determines how many washes ...
https://www.upc.edu/sct/en/equip/316/centrifuge-washer.html

Classifier fibers sieve
Screen and filters set for fibers separation and classification, rejections and kindling through a steps sequence of washing, screening and filtering.
https://www.upc.edu/sct/en/equip/634/classifier-fibers-sieve.html

Climatic chamber
A device that recreates controlled temperature and humidity conditions. It can be programmed to perform cycles. The device has a temperature range of -45 ...
https://www.upc.edu/sct/en/equip/80/climatic-chamber.html

Climatic chamber
A device used for measuring and evaluating the aging of polymer material samples or fabrics under controlled temperature, humidity and light conditions.
https://www.upc.edu/sct/en/equip/327/climatic-chamber.html

Climatic chamber
A passable chamber with a controlled and programmable atmosphere, temperature and humidity. The temperature working range of the chamber is -15 0 C to ...
https://www.upc.edu/sct/en/equip/386/climatic-chamber.html

Climatic chamber
Climatic chamber for temperature and humidity conditions recreation. Working temperature range is between -70 and 150 °C, and 15-98% RH humidity values ...
https://www.upc.edu/sct/en/equip/526/climatic-chamber.html

CO2 laser with 1700 W
A CO 2 laser with 1700 W of power for developing new surface applications in metallic, ceramic and polymeric materials.
https://www.upc.edu/sct/en/equip/225/co2-laser-with-1700-w.html

Coating analyzer
Equipment for coating thickness determination, also chemical composition, by RX fluorescence. Workspace dimensions of 360 x 380 x 240 mm (width x length ...
https://www.upc.edu/sct/en/equip/523/coating-analyzer.html

Combined installation for mortar and concrete testing
An installation made up of three units that share a command system. - Compression and bending machine. A four-column machine for controlling ...
https://www.upc.edu/sct/en/equip/376/combined-installation-mortar-concrete-testing.html

Compression testing machine
A machine with four columns for compression testing with a maximum value of 4,500 kN. The machine is robust and measures 50 cm x 50 cm ...
https://www.upc.edu/sct/en/equip/374/compression-testing-machine.html

Compression testing machine
Equipment used for the realization of conventional compression testing and also for calculate the modulus of rigidity on cylindrical test tubes and construction ...
https://www.upc.edu/sct/en/equip/411/compression-testing-machine.html

Contact angle measure
Optical system device, with automatic dosing unit and software for contact angle measure (both static and dynamic) between liquids and solids. Also suitable ...
https://www.upc.edu/sct/en/equip/778/contact-angle-measure.html

Contact angle measuring system
A device for determining dynamic and static contact angles using sessile and captive drop techniques. It calculates the surface tension, interfacial ...
https://www.upc.edu/sct/en/equip/367/contact-angle-measuring-system.html

Continuous dyeing of fabrics
Equipment used for impregnating dyes on continuous fabric and measuring color fixation. The dye is developed during the process of washing and drying the ...
https://www.upc.edu/sct/en/equip/332/continuous-dyeing-fabrics.html

Curvature testing machine (4 points)
The equipment allows make a curvature test for measuring the rigidly and for value the fatigue resistance of bituminous materials for pavement. The ...
https://www.upc.edu/sct/en/equip/413/curvature-testing-machine-4-points.html

Cutting rheometer
Equipment to measure the cutting effort of bituminous products. The main features of this equipment are: - Angular resolution of 0.012 radians. ...
https://www.upc.edu/sct/en/equip/414/cutting-rheometer.html

Density gradients column
Equipment for determining the density of polymers.
https://www.upc.edu/sct/en/equip/323/density-gradients-column.html

Differential scanning calorimeter (DSC)
A device for determining the degree of crystallinity and the conditions of thermal transition of polymeric materials using the differential scanning calorimetry ...
https://www.upc.edu/sct/en/equip/324/differential-scanning-calorimeter-dsc.html

Differential scanning calorimeter, DSC
A device used for the thermal analysis of polymeric samples based on the amount of heat required to raise their temperature. It can determine the thermal ...
https://www.upc.edu/sct/en/equip/13/differential-scanning-calorimeter-dsc.html

Differential scanning calorimetry (DSC) analyzer
An instrument for conducting thermal analysis to detect changes in the microstructure of materials using heating and cooling ramps. The instrument ...
https://www.upc.edu/sct/en/equip/358/differential-scanning-calorimetry-dsc-analyzer.html

Differential scanning calorimetry (DSC) analyzer
A calorimetric testing device for measuring heat capacities, phase changes, heats of reaction and thermal transitions. It is equipped with a 400 W furnace ...
https://www.upc.edu/sct/en/equip/51/differential-scanning-calorimetry-dsc-analyzer.html

Digital drapemeter
Equipment to measure fabric, leathers and flexible sheet drape. This is a standard model that measures the surface cusickmeter shadow drape of a circular ...
https://www.upc.edu/sct/en/equip/709/digital-drapemeter.html

Digital micrometer
Equipment for paper and paperboardthickness determination, according to ISO 534, ISO 12625-3 (tissue) and EN 57103 (corrugated) for thickness ranges between ...
https://www.upc.edu/sct/en/equip/601/digital-micrometer.html

Disintegrator wet fiber
Equipment for wet fiber disintegration and individualization at low consistency, according to ISO 5263.
https://www.upc.edu/sct/en/equip/590/disintegrator-wet-fiber.html

Dissolution tester
Solution and dissolution measurement equipment, as well as active ingredients releasing, based on different arrays. Its operation is in accordance with ...
https://www.upc.edu/sct/en/equip/797/dissolution-tester.html

Dry grinder pulp
Equipment for paper pulp dry shredding, by means of a rotating blades and toothed ring system.
https://www.upc.edu/sct/en/equip/588/dry-grinder-pulp.html

DSC analyzer using UV radiation
A calorimetric testing device for measuring heat capacities, phase changes, heats of reaction and thermal transitions, with samples subjected to UV radiation.
https://www.upc.edu/sct/en/equip/52/dsc-analyzer-using-uv-radiation.html

Dynamic mechanical testing machine
A dynamic testing machine with an axial hydraulic servo system. It has a frame with two columns and an actuator for compression and traction at ±500 kN. ...
https://www.upc.edu/sct/en/equip/371/dynamic-mechanical-testing-machine.html

Dynamo-mechanical analyzer
A device for measuring mechanical properties of small volumes of material by applying an oscillating or static strength in controlled frequency and temperature ...
https://www.upc.edu/sct/en/equip/153/dynamo-mechanical-analyzer.html

Electric furnace
Electric furnace for carrying out heat treatment, with precise temperature control up to 1500 °C ± 1 °C, heating and cooling ramps program allowed, ...
https://www.upc.edu/sct/en/equip/520/electric-furnace.html

Electric oven drying and sterilization
Oven, with or without air circulation, which allows working in a range of temperatures between 0 0 C and 250 0 C. The unit has a volume of 80 liters
https://www.upc.edu/sct/en/equip/419/electric-oven-drying-sterilization.html

Elmendorf tear tester
Automatic equipment for the determination of the tear resistance by the Elmendorf method of paper, board, foil, etc. All tests carry out under the standards ...
https://www.upc.edu/sct/en/equip/802/elmendorf-tear-tester.html

Environmental chamber
Environmental conditions reproduction device, temperature and humidity controlled, programmable and suitable for cycles within temperature range between ...
https://www.upc.edu/sct/en/equip/576/environmental-chamber.html

Falling rod viscometer
Equipment for determining greasy ink rheological characteristics, such as plastic viscosity (poise or Pa·s) and threshold stress (dynas/cm 2 or Pa)
https://www.upc.edu/sct/en/equip/581/falling-rod-viscometer.html

Fast
Objective measurements of fabrics by performing a series of tests that predict performance properties and appearance of fabrics during the manufacture ...
https://www.upc.edu/sct/en/equip/710/fast.html

Fluorescence spectrophotometer/Fluorimeter
Equipment for the analysis, identification and quantification of chemical substances with molecules that may present fluorescence by means of the fluorescence ...
https://www.upc.edu/sct/en/equip/322/fluorescence-spectrophotometerfluorimeter.html

Fragmentation resistance equipment
Equipment for determining, by means of impact, cohesion loss in open grain size specimens, with temperature control. Equipped with 12 mm wall thickness ...
https://www.upc.edu/sct/en/equip/416/fragmentation-resistance-equipment.html

FTIR spectroscopy
Equipment for identifying functional groups of organic materials, polymers and certain structures of solid and liquid samples by Fourier transform infrared ...
https://www.upc.edu/sct/en/equip/315/ftir-spectroscopy.html

Furnace for feldspathic coatings
A 220 mm x 320 mm x 420 mm baking furnace for feldspathic coating treatments used in dental zirconia and other ceramic heat treatments up to 1200 °C. ...
https://www.upc.edu/sct/en/equip/167/furnace-feldspathic-coatings.html

Glove box
Equipment made up of a 317-liters chamber designed to protect the product from particle pollution while protecting personnel from potentially hazardous ...
https://www.upc.edu/sct/en/equip/154/glove-box.html

Grinding mill
Cellulosic samples grinding mill for further studies and analysis.
https://www.upc.edu/sct/en/equip/604/grinding-mill.html

Gurley permeability tester for paper
Equipment for determining and measuring paper and paperboard samples permeability, according to ISO 5636-5.
https://www.upc.edu/sct/en/equip/609/gurley-permeability-tester-paper.html

Helium pycnometer
A device for measuring the skeletal density of solid materials, porous materials and powders. Its measurement range is between 0.01 cm 3 and ...
https://www.upc.edu/sct/en/equip/361/helium-pycnometer.html

High temperature tube furnace
Tube furnace that reaches a maximum temperature of 1400 °C and can work in a protective atmosphere. It has a timer and a temperature controller ramps ...
https://www.upc.edu/sct/en/equip/528/high-temperature-tube-furnace.html

Hydraulic universal testing machine
The equipment allows make dynamic and static tests (tensile, compression) for bituminous mixtures. It has a maximum weight of 100 kN, and it allow a displacement ...
https://www.upc.edu/sct/en/equip/412/hydraulic-universal-testing-machine.html

Impact compactor
The equipment is an automatic electromagnetic compactor, with a wooden stand and an electronic selector of the shock number, with automatic detention. ...
https://www.upc.edu/sct/en/equip/408/impact-compactor.html

In vitro cell behavior testing
Service related to in-vitro cell analysis on biomaterials in order to study cell adhesion, differentiation and activation. Osteoblasts, fibroblasts and ...
https://www.upc.edu/sct/en/servei/135/in-vitro-cell-behavior-testing.html

Induction furnace
Heat treatment and samples heating equipment by using a solid state induction for three-phase voltage conversion in 30 kW output, with different frequencies ...
https://www.upc.edu/sct/en/equip/524/induction-furnace.html

Infrared spectrophotometer (FTIR)
Equipment used for determining functional groups in polymer materials and tissues using Fourier transform infrared (FTIR) spectrophotometry.
https://www.upc.edu/sct/en/equip/326/infrared-spectrophotometer-ftir.html

IR spectrometer
Equipment for identifying functional groups of organic materials, paints and certain structures of solid and liquid samples by Fourier transform infrared ...
https://www.upc.edu/sct/en/equip/27/ir-spectrometer.html

Laboratory refiner
Equipment for cellulosic raw material shredding and refining, different configurations to obtain dissimilar features samples.
https://www.upc.edu/sct/en/equip/625/laboratory-refiner.html

Lightfastness testing
Equipment for testing color quality and lightfastness by controlling color degradation under xenon light with a temperature of up to 45 °C and up to 65% ...
https://www.upc.edu/sct/en/equip/331/lightfastness-testing.html

Low pressure plasma system
Surface treatment equipment, by means of low temperature plasma with different gases, for nanometer level modifications, without modifying the mechanical ...
https://www.upc.edu/sct/en/equip/798/low-pressure-plasma-system.html

Lyophilizer
A device for freeze-drying a previously frozen product by the vacuum sublimation of ice.
https://www.upc.edu/sct/en/equip/362/lyophilizer.html

Mössbauer spectroscopy
A device for the crystal-chemical characterization of ferrous, crystalline and amorphous materials through the determination of the hyperfine microstructure ...
https://www.upc.edu/sct/en/equip/152/mossbauer-spectroscopy.html

Machine for analyzing specific surface and porosity
A machine for determining the BET area and microporosity of samples. Nitrogen gas is used for specific surface areas of more than 1.0 m 2 ...
https://www.upc.edu/sct/en/equip/363/machine-analyzing-specific-surface-porosity.html

Mass spectrometer
Equipment that enables high-speed analysis of gases and gas mixtures under continuous reaction.
https://www.upc.edu/sct/en/equip/26/mass-spectrometer.html

Maturity tester
determining maturity of and refinement, measurements .
https://www.upc.edu/sct/en/equip/708/maturity-tester.html

Mechanical profilometer
Equipment that consists on a measurement tool for characterizing surface topography. It is suitable for the determination of changes in height between ...
https://www.upc.edu/sct/en/equip/399/mechanical-profilometer.html

Mechanical properties characterization in metallic materials
Flow curve characterization for metallic materials, both in conventional compression tests and uniaxial tensile, hot or cold, to determine ductility parameters, ...
https://www.upc.edu/sct/en/servei/103/mechanical-properties-characterization-metallic-materials.html

Metallic materials heat treatments
Mass heat treatment design, study and implementation service, for metallic materials, both under continuous cooling and thermal treatments and/or thermomechanical.
https://www.upc.edu/sct/en/servei/105/metallic-materials-heat-treatments.html

Meter fiber length
Equipment for image processing and fiber length measurements, according to ISO 16065-1 and 16065-2. Analyzer parameters and measures provided are fiber ...
https://www.upc.edu/sct/en/equip/567/meter-fiber-length.html

Micro gas chromatograph
Equipment for the quantitative analysis of continuous reaction products from parts per million (ppm) to percentages (%).
https://www.upc.edu/sct/en/equip/28/micro-gas-chromatograph.html

Microbalance
Equipment for making precision mass measurements from 0.001 mg to 5 g.
https://www.upc.edu/sct/en/equip/328/microbalance.html

Microhardness tester
Equipment for determining the hardness of solid materials. The Vickers hardness is determined between 98 mN (10 g - 0.01 HV) and 19.6 N (2 kg – 2 HV).
https://www.upc.edu/sct/en/equip/156/microhardness-tester.html

Microindentation hardness testers
Normal 0 21 false false false MicrosoftInternetExplorer4 ...
https://www.upc.edu/sct/en/equip/396/microindentation-hardness-testers.html

Microscope with polarizer
Equipment for determining the birefringence of polymer materials through polarized light observation. Adapted with a Polaroid camera backing for achieving ...
https://www.upc.edu/sct/en/equip/325/microscope-with-polarizer.html

Microtensile
Equipment with a load cell of 5 kN, which allows uniaxial tensile tests on specimens cold for small size and flat geometry.
https://www.upc.edu/sct/en/equip/572/microtensile.html

Muffle
Equipment used for heat and processing treatments at high temperatures (up to 900 °C).
https://www.upc.edu/sct/en/equip/15/muffle.html

Optical microscope
the observation, study solid samples , , magnification. camera for further analysis. of textile products.
https://www.upc.edu/sct/en/equip/711/optical-microscope.html

Petrographic microscope
Stereoscopic petrographic microscope (binocular) for mineral layers observation and study, up to 500 magnifications. Pictures or video caption is allowed.
https://www.upc.edu/sct/en/equip/648/petrographic-microscope.html

PFI mill
Equipment for paper pulp refining, according to ISO 5264-2, as a preliminary step to characterize samples physical properties
https://www.upc.edu/sct/en/equip/605/pfi-mill.html

Porosimeter
A machine for determining macroporosity and mesoporosity distributions. The detection range is 0.003­–360 micrometers.
https://www.upc.edu/sct/en/equip/364/porosimeter.html

Potential flow and ζ potential measurement
Equipment for streaming potential and zeta potential (ζ) identification and measurement in fibrous suspensions.
https://www.upc.edu/sct/en/equip/614/potential-flow-ζ-potential-measurement.html

Potentiostat
Potential and current measurement equipment. Suitable for determining corrosion potential, corrosion intensity, polarization resistance and corrosion rate ...
https://www.upc.edu/sct/en/equip/521/potentiostat.html

Potentiostat
A device for determining the electrochemical properties of metals, including their corrosion resistance.
https://www.upc.edu/sct/en/equip/357/potentiostat.html

Potentiostat - galvanostat
Equipment used for the synthesis and electrochemical characterization of polymeric materials. It has an output current of 200 mA and a voltage of 20 V, ...
https://www.upc.edu/sct/en/equip/187/potentiostat-galvanostat.html

Pressure Aging Vessel,PAV
Equipment that allows accelerated aging processes bituminous products by pressure and temperature.
https://www.upc.edu/sct/en/equip/422/pressure-aging-vesselpav.html

Print testbed
Equipment for ink/paper relationship testing in dynamic conditions with parameters variation as pressure, speed and ink depth. Characteristic tests for ...
https://www.upc.edu/sct/en/equip/597/print-testbed.html

Profilometer
Electronic equipment for surface roughness or profile measurement by using a pin contact sensor transmitting surface irregularities detected to an amplifier, ...
https://www.upc.edu/sct/en/equip/512/profilometer.html

PTT building diagrams (Precipitation-Temperature-Time)
Service for precipitation-temperature-time (PTT) construction of curves by performing stress relaxation tests on subjected heat treatment materials.
https://www.upc.edu/sct/en/servei/100/ptt-building-diagrams-precipitation-temperature-time.html

Reflectance spectrophotometer
Equipment for evaluation of optical properties of samples of paper and other surfaces, for wavelengths between 400 nm to 700 nm. Enables the identification ...
https://www.upc.edu/sct/en/equip/724/reflectance-spectrophotometer.html

Resonance stiffness measurement
Equipment for bending stiffness measurement and determination in paper samples, by using resonance method, according to ISO 5629.
https://www.upc.edu/sct/en/equip/618/resonance-stiffness-measurement.html

Roadmap generator, Rapid-Köthen method
Equipment for roadmap generation, according to Rapid-Köthen method, to reproduce industrial conditions and parameters on a laboratory scale, and to perform ...
https://www.upc.edu/sct/en/equip/596/roadmap-generator-rapid-kothen-method.html

Rotational viscometer
Equipment for fluids viscosity measurement and analysis(particularly sauces coated paper), as well as high viscosity and thixotropic time-dependent rheological ...
https://www.upc.edu/sct/en/equip/725/rotational-viscometer.html

Salt fog chamber
Sealed chamber designed to create an artificial corrosive atmosphere for accelerated corrosion testing. Working atmosphere can be saline, acetic or saline-acetic. ...
https://www.upc.edu/sct/en/equip/511/salt-fog-chamber.html

Sandblaster
Equipment used for modifying the surface roughness of components used for dental applications. It is also suitable for surface cleaning dental material ...
https://www.upc.edu/sct/en/equip/171/sandblaster.html

Scanning Electron Microscopy (SEM)
The scanning electron microscope is based on the interaction between an electron beam and the surface of a given solid material. The result is a high-resolution ...
https://www.upc.edu/sct/en/equip/714/scanning-electron-microscopy-sem.html

Schopper-Riegler drainage
Equipment for pulp sample drainability measurement and determination, as well as refining behavioral assessments, according to ISO 5627-1.
https://www.upc.edu/sct/en/equip/621/schopper-riegler-drainage.html

Scott Bond strength
Equipment for paper and paperboard samples resistance measurement and determination, in Z direction.
https://www.upc.edu/sct/en/equip/622/scott-bond-strength.html

Spectrometer for metal analysis
Equipment for metals chemical composition determining, by sample vaporizing and sparks analysis. Light emission of atoms and ions released during the process ...
https://www.upc.edu/sct/en/equip/509/spectrometer-metal-analysis.html

Spectroscopic ellipsometer
Equipment for characterizing thin semi-transparent layers (1 nm to 5 mm). The system evaluates the thickness and the optical properties of the material ...
https://www.upc.edu/sct/en/equip/224/spectroscopic-ellipsometer.html

Spin coater
Equipment that enables the deposition of a uniform film, of high precision and nanometric thickness, on the surface of a ceramic, metal or polymer sample. ...
https://www.upc.edu/sct/en/equip/189/spin-coater.html

Static stiffness measurement (Taber)
Equipment for bending stiffness measurement and determination by Taber method, according to ISO 5682.
https://www.upc.edu/sct/en/equip/619/static-stiffness-measurement-taber.html

Stereo microscope
Optical microscopy equipment for observation and reflection in 3-D samples. It has a digital camera to capture Deltapix 300 micrographs and perform image ...
https://www.upc.edu/sct/en/equip/712/stereo-microscope.html

Stove
Equipment with an 80-liter capacity for the thermal treatment of metallic materials, with an air circulation system and digital temperature control. The ...
https://www.upc.edu/sct/en/equip/14/stove.html

Suntest
Equipment for suntest and accelerated aging test, radiation intensities between 765 and 400 W/m 2 (UV max. for λ <800 nm), controlled at constant ...
https://www.upc.edu/sct/en/equip/633/suntest.html

Tabletop electron microscope
Tabletop electronic equipment for solid samples studies, by providing stereoscopic images up to 1000 magnification.
https://www.upc.edu/sct/en/equip/647/tabletop-electron-microscope.html

Tensile tester
Tensile testing machine for determining the tensile tests on textile materials. Data acquisition is digitized. Two load cells 10N and 5 KN, serrated jaws ...
https://www.upc.edu/sct/en/equip/713/tensile-tester.html

Thermographer
Equipment for analyzing infrared images using temperature gradients for different materials. It has its own software and calibrated probes.
https://www.upc.edu/sct/en/equip/178/thermographer.html

Thermogravimetric analyzer
A device for carrying out thermogravimetric testing and quantitative measures of mass changes during thermal degradation and transition processes (stability ...
https://www.upc.edu/sct/en/equip/53/thermogravimetric-analyzer.html

Thermomechanical analyzer
A testing device for measuring expansion coefficients and dimensional variations of a body caused by temperature changes, without changing its state. The ...
https://www.upc.edu/sct/en/equip/55/thermomechanical-analyzer.html

Transmission electron microscope (TEM)
Equipment for solid polymer samples structure and morphology observation, characterization and study, by means of electron diffraction, in order to relate ...
https://www.upc.edu/sct/en/equip/675/transmission-electron-microscope-tem.html

Transmission electron microscopy (TEM)
Equipment for the observation and characterization of solid samples using the visualization provided by an electron beam. Samples must be put into sufficiently ...
https://www.upc.edu/sct/en/equip/155/transmission-electron-microscopy-tem.html

Tribometer
Equipment for testing wear with several configurations (pin-on-disc, ball-on-disc, disc-on-disc) in a temperature range up to 150 °C and with applied ...
https://www.upc.edu/sct/en/equip/172/tribometer.html

Ultraviolet-visible-infrared spectrometer
Equipment that consists of a spectrometer equipped with a software "UV-Probe" for photometric analysis of liquids or solids, in a wavelength ...
https://www.upc.edu/sct/en/equip/406/ultraviolet-visible-infrared-spectrometer.html

Universal tensile test machine
Tensile and compression test equipment, both cold and hot, by means of an 1100 °C radiation furnace coupling (Chamber, Model E4 infrared heating system). ...
https://www.upc.edu/sct/en/equip/565/universal-tensile-test-machine.html

Universal testing machine
Electromechanical equipment for tension, compression and wear resistance testing, software control and data acquisition included. 10 N and 500 N cell load ...
https://www.upc.edu/sct/en/equip/591/universal-testing-machine.html

UV Spectrophotometer
Double beam spectrophotometer with variable spectral bands (between 0.5 and 4 nm) and wavelengths between 190 nm and 1100 nm. It is fully automated and ...
https://www.upc.edu/sct/en/equip/211/uv-spectrophotometer.html

UV transmittance analyzer
A device for determining the UV transmittance of fabrics, creams and containers, as well as the in-vitro UV protection factor of fabrics and the sun protection ...
https://www.upc.edu/sct/en/equip/321/uv-transmittance-analyzer.html

Valley pile
Equipment for pulp refining, according to ISO 5264-1, as a preliminary step to physical properties characterization.
https://www.upc.edu/sct/en/equip/612/valley-pile.html

Water bath
Water bath, 10 liters volume, 350 mm x 210 mm x 140 mm size (length x width x height), temperature range between 0 and 100 ° C.
https://www.upc.edu/sct/en/equip/417/water-bath.html

Water permeability meter
Equipment used for determining water permeability in fabrics under hydrostatic pressure and identifying the maximum level of water pressure that a fabric ...
https://www.upc.edu/sct/en/equip/317/water-permeability-meter.html

Water retention test, WRV
Equipment for pulps water value determining (WRV) in pulps, according to standard 23714.
https://www.upc.edu/sct/en/equip/592/water-retention-test-wrv.html

Wheel-tracking test machine
Equipment to measure the plastic deformation of bituminous mixtures according to the UNW EN 12697-22 and the NLT-173. It is possible, with this equipment, ...
https://www.upc.edu/sct/en/equip/415/wheel-tracking-test-machine.html

X-ray diffraction
Equipment of X-ray diffraction. The equipment is a modular system, that in this case it has the following elements: - A vertical goniometer with ...
https://www.upc.edu/sct/en/equip/400/x-ray-diffraction.html

X-ray diffraction (K-alpha-1)
Equipment of X-ray diffraction. The equipment is a modular system, that in this case it has the following elements: - A vertical goniometer with ...
https://www.upc.edu/sct/en/equip/402/x-ray-diffraction-k-alpha-1.html

X-ray diffraction (K-beta)
Equipment of X-ray diffraction. The equipment is a modular system, that in this case it has the following elements: - A vertical goniometer with ...
https://www.upc.edu/sct/en/equip/401/x-ray-diffraction-k-beta.html

X-ray photoelectron spectroscopy
Alt ultra system consisting in an imput and storage of samples chamber that can be connected, at the same time, with a chamber of X-ray photoelectron spectroscopy ...
https://www.upc.edu/sct/en/equip/398/x-ray-photoelectron-spectroscopy.html

Zero-span tensile test
Electromechanical zero-span tensile test equipment, for dry or wet paper samples, according to ISO 15361.
https://www.upc.edu/sct/en/equip/673/zero-span-tensile-test.html

Pujar
Scientific and Technical Services at the UPC
© UPC Open link in new window. Universitat Politècnica de Catalunya · BarcelonaTech.