Thermo-Mechanical Lab. https://www.upc.edu/ccp/en/Facilities/thermo-mechanical-lab https://www.upc.edu/ccp/++resource++plone-logo.svg Share: Thermo-Mechanical Lab. Dynamic Mechanical Thermal Analysis (DMTA) Model TA Instruments Q800 Temperature -150 to 600ºC Frequency 0.01 Hz to 200 Hz Force 0.0001 N to 18 N Heating rate 1 to 5 ºC/min Geometries Single Cantilever Dual Cantilever Film Tension 3 Point bending Compression Indentation Differential scanning calorimetry (DSC) Model Perkin Elmer Pyris 1 Temperature -30 to 500ºC Heating rate 5 to 50 ºC/min Weight of sample 4 to 12 mg Thermogravimetric Analysis (TGA) Model Mettler Toledo DSC 1 Star System Temperature 30 to 1100ºC Heating rate 5 to 50 ºC/min Weight of sample 0.5 to 20 mg Work Environment Nitrogen or aire Heat Deflection Temperature (HDT) Model CEAST 6510 and 6520 Dynamic Oscillatory Rheometer Model AR-G2 Temperature range -70 to 400 ºC (nominal) Frequency range 0.001 to 100 Hz Geometries available Parallel plates & coneplate (2º), both with diameter of 25 mm Applied torque range 0.003 to 200 mN.m Axial load range (N) 0.005 to 50 N Capillary rheometer Model RHEOLOGIC 5000 Twing Bore General specifications ISO11443 and ASTM D3835 Load range 50 kN Temperature range 50 to 350 ºC Plunger velocity 0.0024 to 1200 mm/s Pressure measurement range 0 to 200 MPa Accesories "Melt strength" medule Melt flow indexer Model ZWICK 4106BECC & fluidity melt flow CEAST
Share: